10 Basics Regarding Repair Double Glazing Window You Didn't Learn At School

· 5 min read
10 Basics Regarding Repair Double Glazing Window You Didn't Learn At School

Why You Should Leave Double Glazing Window Repair to the Experts

A double-glazed window that is not functioning properly can lead to condensation and draughts as well as affect the security of your home. It is best to leave the repair or replacement to the experts.

Misting is one of the most frequent signs that the seal between your windows has broken. This can be an expensive issue that must be addressed immediately.

Cracked or chipped panes

Glass that is chipped or cracked isn't just a nuisance and can let air to enter and cause cooling and heating bills to rise. Window manufacturers suggest replacing double panes if the glass is cracked or broken so it maintains an effective seal to keep your home dry and warm.

The good news is that repairing damaged windows isn't nearly as costly or difficult as it might seem. It's important to act quickly. Window cracks usually worsen as time passes, leading to energy leaks So you'll need to complete the task as soon as you can to avoid further problems.

A small crack can develop into a web of cracks which will make your double pane window unusable, so it's important to take the necessary steps to fix it before it gets out of hand.

Taping the crack using masking tape or duct tape is one quick and easy method. For small cracks, such as ones caused by temperature fluctuations just one piece of tape is typically sufficient. However, more severe cracks will require that you extend the tape to the edges of the crack.

You can also try a glass adhesive such as Loctite, Gorilla Glue, or a similar product made specifically for windows. This kind of glue is similar to nail polish in that it fills in the crack, preventing it from becoming worse and sealing the crack so that air cannot pass through from outside.  East Grinstead window repairs  between this kind of glue and nail polish is that it's more durable and doesn't flake or peel.

If you're looking for a temporary solution, cut a piece of plastic large enough to cover the crack or hole from a garbage bag, shower curtain made of plastic or tarp. Tape the plastic to your window using masking or duct tape. Let it dry. This will block rain, wind, or insects while you wait for your new double pane window to be installed.

Apply a two-part epoxy on the broken area of your window to provide an effective solution that is permanent. This kind of putty will seal the crack and can be painted to match the frame of your window.

Condensation

Condensation can be found typically between the window panes. It can lead to mold growth and other issues. It can also lead to the loss of heat from your windows, which is why it is important to deal with it swiftly. It happens when warm heavy-laden air comes in contact with a cool object and the water vapor that is in the air condenses onto the cooler surface. You can learn more about condensation here. A professional can replace the seal, upgrade your glazing, or even install new windows to fix this issue permanently.

Broken Locks or Handles

Although it is not common, occasionally double glazing window handles break. This can be a frustrating experience and expose your home to burglars who might be able to open the handle easily to unlock the windows. Luckily, replacing a broken window handle is fairly easy and affordable If you know what to look for.

The mechanism that opens a uPVC window made of sash consists of three parts: the handle, gearbox, and drive gear. The handle is used to control the gearbox, which controls the drive gear. This allows the window to open and close. If the handle fails, you will find that the gearbox gets blocked and cannot function. This could be caused by a variety of reasons, including a broken spindle in the handle or caused by wear and tear and is simply worn down.

If the lock in the handle is broken then you'll need to replace it. To do this, you'll need to find the fixing screws or pins which hold it in place and are usually found on the inside face of the handle. Once you've removed the handle that you have previously used, simply slide in the new one and secure it with the screw or pins. Make sure you ensure that the handle is aligned correctly with the frame before re-fitting it. It is also important to put the screw covers over any exposed screws, as this will help to keep them out of sight.

Upvc windows that aren't shut properly not only let cold air in, but they could also let valuable heat escape and possibly cause damp and water damage. UPVC windows should never be left open, as this can invite burglars to enter.

If your uPVC window isn't closing properly, you will have to contact your installer or a local tradesman to seek assistance. They can check the problem for you and give you advice on the best way to fix the issue. They offer a range of double-glazing repair and services including the installation of new hinges, locks or handles, if necessary.

Dropping Panes

Double-pane windows are a smart investment for your home. They offer insulation and give your home a modern style which will increase the value of your home. However, there are some issues that may arise from your new window and you should know when to take action.


Chips or cracks in your windows are a sign that your windows need to be replaced. These damages let outside air into your home, making it difficult for cooling systems to keep up with the temperature of your home. This can cause your system to work harder than it should, increasing your energy costs.

Fogging between the panes of glass is also an indication that your windows require replacement. This is because the inert gas that is sandwiched between the glass has escaped. The seal will require replacement once this happens and cannot be done separately.

The seals on your windows made of rubber can start to degrade over time. This could be due exposure to sunlight, ageing and harsh cleaning products. Seals are prone to losing their ability to protect themselves.

You should call an expert to repair a window that is cracked or chipped. This is not something that you should attempt yourself since handling broken glass is dangerous. They will have the specialist tools needed to safely remove the broken pane and replace it.

Double-glazed windows can be repaired by replacing the inner or outer pane. This can be more costly depending on the type and size of your window. However, if you want to reduce your energy bills and increase the efficiency of your double glazed window, this is the best option.

It is important to remember that the frame of your double-glazed window could also require replacement. Often, when the double pane of glass is replaced it is found that the frames are old and require replacement. A professional glass specialist can help you choose the ideal double glazed window for your home.